Accessories
Filters
Filtering is your best defense against premature pump wear, gun wear, surface defects, reworks and tip plugging. Graco has a variety of filters to meet your finishing needs.
Hoses
Fluid and air hoses for liquid finishing coatings needs.
Solvent recovery
Solvent recovery remove soils, debris and oils from used cleaning solvent through distillation, and allow for reuse of the cleaning solvent. A solvent recovery system for used solvents can reduce solvent purchases by over 95% and reduce chemical waste disposal cost by over 90%.
For solvent processes like vapor degreasing, chemical disposal can be unexpectedly expensive. A solvent recycler machine not only reduces chemical disposal costs, but also new solvent purchases. Solvent recovery equipment can recycle and recover most solvents, including:
- Mineral spirits
- Paint Thinner
- Acetone
- IPA (isopropyl alcohol)
- MEK (methyl ethyl ketone)
- Xylene
- Hexane
- Various alcohols
- Chlorinated solvents (AK225, 1,2 trans-dichloroethylene / trans DCE, 3M™ Novec™, Dupont Vertrel)
- Microcare solvents
- Terpenes Toluene
- Aromatic Solvents
Drum tumbler
Mix inside a closed drum! NO Mess… NO contamination
Use Drum Tumblers to:
- Blend batches of powder
- Ensure uniform batches
- Mix drums of paint, oils, urethane resin, plastisol, glue, dyes, flavors, etc.
- Mix chemical drums into homogeneous product prior to use
- Grind and smooth parts in media
Mix products inside sealed 1 to 5 gallon (4 to 20 liter) cans or pails. Reduces hazards and saves clean-up. Single and double can tumblers are available.
Encapsulated Ball Valves
All Hosco 316 series patented encapsulated ball valves have no cavities around the ball so there is no place for paint to collect and dry. They also include PTFE seats and an adjustable retainer ring. All ball valves are rated for 1000 PSI (70 BAR) working pressure.
Flow Control Restrictors
Hosco flow control restrictors are available in stainless steel or lightweight composite materials. They are compact, low cost, lightweight, tamper proof, replace gun regulators, and have a smooth flow .350 I. D. recirculating passage with no pressure loss.
“Low Shear” Cavity Free Connection Fittings
All Hosco connection fittings feature its new “Low Shear” design that incorporates a taper-to-taper connection, which eliminates the blunt end or shelf surface found in conventional fittings. The design enhances Hosco’s smooth bore, cavity free product line helping metallic paint finishes retain their color, luster and quality while reducing system pressure loss, speeding installation procedures and furthering overall safety.
Quick Disconnect “No-Spit” Fittings
Hosco paint quick disconnects work precisely with Hosco stems to eliminate the accumulation of paint and sludge that forms during everyday use of paint quick disconnects sets. The fittings eliminate the need for frequent solvent flushing or washing, cleaning away accumulated waste to prevent paint pits.
Restrictor/Regulator
The Hosco HHR-6 restrictor/regulator incorporates a restrictor on a regulated paint outlet and then permits adjusting it to the desired flow rate to the spray gun. This helps attain maximum accuracy and repeatability while maintaining spray gun control even in the extremely low range. This restrictor/ regulator is well suited for painting large structures with their inherent elevation changes from top to bottom such as aircraft, trucks and buses or for electrostatic air spray/HVLP painting applications.
Agitator for Pails
Designed for a wide variety of industrial and automotive applications. Agitators ensure paints and fluids are agitated precisely to keep paint solids in suspension and maintain optimum finishing characteristics.
Designed for a wide variety of industrial and automotive applications. The agitators ensure paints and fluids are agitated precisely to keep paint solids in suspension and maintain optimum finishing characteristics. Binks agitators are suitable for a wide range of viscosities and paint material types including solvent based, waterborne and many other fluids.
Speed
Speed of propeller shaft is determined by fluid, 3000 RPM maximum
Air Supply: Air supply to the motor should be 4 bar (60 psi) gauge pressure minimum.
Furnished alone or as an assembly, mounted to container covers.
Agitator and drive assembly only, standard
Agitators for Drums
Binks Agitators can be purchased independently or mounted to container covers. The speed of the propeller shaft is determined by fluid.
Designed for a wide variety of industrial and automotive applications. The agitators ensure paints and fluids are agitated precisely to keep paint solids in suspension and maintain optimum finishing characteristics. Binks agitators are suitable for a wide
range of viscosities and paint material types including solvent based, waterborne and many other fluids.Note: Binks recommend the use of an air oil lubricator with these air driven agitators.
Model 41-3304 for 205 litre (55 Gallon) Drums
Stainless Steel agitator and drive assembly only
Speed: Speed of propeller shaft is determined by fluid, 1000 RPM maximum
Air Supply: Air supply to the motor should be 4 bar (60 psi) gauge pressure minimum.
Hose & Tubing Connectors
Complete line of hose fittings for most every type of application.
Generally, these PA (PolyAmide) connectors are used in ungrounded or high dielectric designed systems to minimize the concerns for static discharge (arcs or sparks) or pinholing/dielectric burn thru of thermoplastic components in the fluid delivery system. The PA family of hose connectors are available in common sizes of fractional inch or metric hose connection ends, and in straight or compact 90 degree configurations. The connection point is available in two common ends- NPT/BSPT(PT) or NPS/BSPP(PF) with single or double dielectric gasket/seal design.
The end connections are 1/8”, 1/4”, and 3/8” sizes.
PolyAmide Materials of Construction suitable for most paints, coatings or solvents with a wide range of chemical compatibility.
One common style of connector for fractional inch and metric hoses or tubes with straight or 90 degree styles.
Robust designs
Mechanical retention of hose and tube to insure safety and trouble free operationHosco PA Hose Connectors are designed to provide safe and non-conductive connections of hose and tubing using the robust and industry leading Hosco barb and nut style retention system. These connectors significantly exceed the performance of other style connectors and provide the highest level of safe and reliable connections found today for use in flammable or hazardous fluid handling.
Generally, these PA (PolyAmide) connectors are used in ungrounded or high dielectric designed systems to minimize the concerns for static discharge (arcs or sparks) or pinholing/dielectric burn thru of thermoplastic components in the fluid delivery system. The PA family of hose connectors are available in common sizes of fractional inch or metric hose connection ends, and in straight or compact 90 degree configurations. The connection point is available in two common ends- NPT/BSPT(PT) or NPS/BSPP(PF) with single or double dielectric gasket/seal design.
The end connections are 1/8”, 1/4”, and 3/8” sizes.
PolyAmide Materials of Construction suitable for most paints, coatings or solvents with a wide range of chemical compatibility.
One common style of connector for fractional inch and metric hoses or tubes with straight or 90 degree styles.
Robust designs
Mechanical retention of hose and tube to insure safety and trouble free operation
Prefis Connectors
Easy to use Hosco Prefis Connectors
Installing new or modifying existing piping systems is easier with the Hosco PreFiS connector family of products.
Installing new or modifying existing piping systems for fluids such as paint or high viscosity sealer header systems has never been faster or easier than with the Hosco PreFiS connector family of products.
Meters & Gauges
Graco’s Meters & Gauges for liquid coatings are designed to handle a broad range of materials, pressures and flow rates. They can ensure precision and accuracy in all your dispensing needs.
Solvent Distillation System
In industrial applications, distillation is a process widely used to purify a mixture or separate contaminants from a mixture. The specific goal of the distillation process varies from one application to another.
In chemical or food manufacturing, it usually aims to purify a product by removing all toxic or impure materials. The end result is a mixture that is highly concentrated or purified from all contaminants.
However, this could also be used to recover a contaminated mixture, such as waste cleaning solvent. In this case, the concentrated mixture is rejected and retaining the distilled solvent becomes the objective of the process.
Our solvent distillation systems are especially designed to reclaim waste solvents generated from a variety of industrial applications, including:
Recycling Waste Cleaning Solvents
Flexo/Litho Printing Solvent Recovery
3D Printing Solvent Recovery
Filters
Safe guard your process by removing contaminates from your circulation line. Graco has a high quality filter solution for a wide range of pressure and flow rates.
Bag Filter
Bag filters are a great solution for filtering high volumes of liquid. They are simple, economical, and effective. This filter works well in conjunction with any of our high quality, high volume pumps. Graco’s high capacity filters extend the time between filter changes which is ideal for large circulation systems in which downtime is not an option.
Red Alert
Red Alert filters are a unique filtering option. The integrated Red Alert Pop Up Indicator signals the user that it is time to change the filter. This minimizes operator error and the need for check sheets or maintenance schedules. It also keeps filters from clogging and ensures your operation runs more efficiently.
High Pressure
Graco’s high pressure filter is ideal for high or low pressure finishing applications to reduce material usage during flushing to save you money. The design also resists wear and damage from even the most corrosive and abrasive materials. Whether used on a spray package, a 2K catalyst system or circulation out-feed, this versatile filter won’t let you down.
Stainless Steel High Pressure Filter
- Compatible with catalyst and waterborne materials
- Many porting options for different gauge, drain valve, and fluid line options
- Compact size is ideal for spray packages
High Pressure Red Alert Filter
- Red Alert indicator signals filter element replacement to ensure efficient filtration
- Large flow capacity is ideal for large circulation and supply systems
- Integrated mounting holes make installation to frame and equipment easy
- Bottom port for installing quick flush ball valve
Low Pressure Red Alert Filter
- Red Alert indicator signals filter element replacement to ensure efficient filtration
- Large flow capacity is ideal for large circulation and supply systems
- Integrated mounting holes make installation to frame and equipment easy
- Bottom port for installing quick flush ball valve
Model 6 Bag Filter Housing
- High flow capacity ideal for large circulation systems
- Easy to replace bag filters are inexpensive and effective at filtering many types of media
- Flexible filter options make it easy to fine tune your filtration system
Model 6 Bag Filter Elements
- Many mesh sizes available to meet you exact filtration needs
- Plastic rim top uses fluid pressure to improve sealing force
- Stainless steel rim top uses friction to seal
Model 12 Bag Filter Housings
- High flow capacity ideal for large circulation systems
- Easy to replace bag filters are inexpensive and effective at filtering many types of media
- Flexible filter options make it easy to fine tune your filtration system
Model 12 Bag Filter Housings
- Many mesh sizes available to meet you exact filtration needs
- Plastic rim top uses fluid pressure to improve sealing force
- Stainless steel rim top uses friction to seal
Pressure Regulators
Precise fluid control is crucial to any finishing process. Graco has a proven line of fluid
pressure regulators to meet all of your finishing needs. Our experience provides us unique insight in to the ideal fluid pressure regulator for a wide array of finishing applications and materials
Fluid Regulator
Fluid pressure regulators control pressure of the downstream fluid, allowing operators to accurately control the pressure to guns, applicators and dispense valves. This ensures the process is stable and maintains the optimal conditions needed for a smooth paint finish, consistent extrusion or steady flow. Graco fluid regulators are designed with wear resistant materials for long life, even when using harsh materials. With decades of experience and continuous improvement, Graco has created some of the most reliable, high performance regulators in the industry.
Back Pressure Regulator
Control upstream fluid pressure with Graco back pressure regulators. Our back pressure regulators use closed loop control to maintain the pressure of the system regardless of flow demand. This allows operators to trigger guns, valves, and other flow controls without changing the system pressure.
Low Pressure Fluid Pressure Regulator
- Stainless steel wetted materials are compatible with catalyst and waterborne materials
- Removable adjustment key eliminates operator interference
- Manual quick flush mode ensures easy cleaning without impacting production settings
- Air operated model (214980) provides easy automation opportunities
- Low shear model (222115) uses laminar diaphragm valve to reduce material degradation and color matching issues, especially with metallic paint
- Tungsten and carbide materials ensure low wear and long life
- PTFE/Elastomer hybrid diaphragm withstands wear while maintaining accurate responsiveness
Low Pressure Lightweight Composite Fluid Pressure Regulator
- Lightweight composite material is compatible with waterborne materials
- PTFE, stainless steel seat, and carbide ball provide wear resistance
- Air operated model (241976) provides easy automation opportunities
- Pressure adjustment key with locking mechanism protects production settings
High Pressure Corrosion Resistant Fluid Pressure Regulator
- Stainless steel wetted materials are compatible with catalyst and waterborne materials
- Air operated model (241976) provides easy automation opportunities
- Tungsten and carbide materials ensure low wear and long life
- Valve cartridge for quick cleaning and replacement – reduce downtime
- Glycerin filled gauge for accurate pressure reading
High Pressure Corrosion Resistant Mini Fluid Pressure Regulator
- Stainless steel wetted materials are compatible with catalyst and waterborne materials
- Pressure adjustment key with locking mechanism protects production settings
- Valve cartridge for quick cleaning and replacement – reduce downtime
- Compact and lightweight design saves space and reduces payload for spray packages
- Tungsten and carbide materials ensure low wear and long life
High Pressure Fluid Pressure Regulator
- Tungsten and carbide materials ensure low wear and long life
- Plated carbon steel housing is compatible with solvent-borne materials
- Laser-marked indication lines for easy pressure adjustment and process control
- Ergonomic adjustment knob
Low Pressure Corrosion Resistant Fluid Back Pressure Regulator (BPR)
- Stainless steel wetted materials are compatible with catalyst and waterborne materials
- Hardened stainless steel seat ensure low wear and long life
- PTFE/Elastomer hybrid diaphragm withstands wear while maintaining accurate responsiveness
- Large orifice accommodates high volume flow rates
- Air operated models available for automated control, Conversion kit (15J498)
Low Pressure Mini Fluid Back Pressure Regulator (BPR)
- Stainless steel wetted materials are compatible with catalyst and waterborne materials
- Tungsten and carbide materials ensure low wear and long life
- Compact and lightweight design saves space and reduces payload for small circulation systems
- PTFE/Elastomer hybrid diaphragm withstands wear while maintaining accurate responsiveness
- Air operated model available for automated control, Conversion kit (237448)
Air Operated Corrosion Resistant Fluid Back Pressure Regulator (BPR)
- PTFE/Elastomer hybrid diaphragm withstands wear while maintaining accurate responsiveness
- Stainless steel wetted materials are compatible with catalyst and waterborne materials
- Hardened stainless steel seat ensure low wear and long life
- Large orifice accommodates high volume flow rates
- Air operated for remote automated control to eliminate operator interference
- Implement sleep mode to reduce pump energy consumption during non-production
Low Shear Corrosion Resistant Fluid Back Pressure Regulator (BPR)
- Stainless steel membrane diaphragm is highly wear resistant while maintaining accurate responsiveness
- Low Shear diaphragm valve has minimal restriction to reduce material degradation and color matching issues, especially with metallic paint
- Stainless steel wetted materials are compatible with catalyst and waterborne materials
- Large fluid passages to accommodate high volume flow rates
Low Pressure Fluid Back Pressure Regulator (BPR)
- Electroless nickel plated aluminum housing with smooth flow orifices
- Tungsten and carbide materials to resist wear
- PTFE/Elastomer hybrid diaphragm withstands wear while maintaining accurate responsiveness
- Compatible with solvent-borne materials
High Pressure Fluid Back Pressure Regulator (BPR)
- Tungsten and carbide materials ensure low wear and long life
- Plated carbon steel housing is compatible with solvent-borne materials
- Laser-marked indication lines for easy pressure adjustment and process control
- Ergonomic adjustment knob
Gun-Mounted Fluid Pressure Regulator Gun Regulator
- Stainless steel materials are compatible with catalyst and waterborne materials
- PTFE/Elastomer hybrid diaphragm withstands wear while maintaining accurate responsiveness
- Easy and accurate pressure adjustment at the gun to fine tune pressure settings during production
- Connects quickly to spray guns using twistlock connector
- Circulate materials though the regulator to ensure a uniform fluid suspension and eliminate material stagnation
Tamper-Resistant Circulating Restrictor Valves Gun Regulator
- Manually adjust flow settings at the gun
- Tamper resistant adjustment knob to eliminate operator interference
- Circulate materials though the valve to ensure a uniform fluid suspension and eliminate material stagnation
- Stainless steel materials are compatible with catalyst and waterborne materials
- PTFE/Elastomer hybrid diaphragm withstands wear while maintaining accurate responsiveness
- Connects quickly to spray guns using twistlock connector
Quick Couplers Other Accessories
- Stainless Steel and PTFE materials are compatible with finishing materials
- Quick couplers automatically seal once disconnected
- Quickly change between guns, regulators, and lines to reduce setup, changeover, and maintenance time
- Don’t flush through guns tips, disconnect and flush through quick connects. Reduce flushing time and avoid premature tip wear.
- Provide flexibility for operators, especially those that own or maintain their own guns. Promote daily maintenance.
- Compatible with Graco Gun Regulators and Restrictors
Agitators
Mixing is step one!
If the material is not properly mixed, it will never reach optimal performance conditions despite the highest quality pumping, proportioning, and spray guns. Graco offers a complete line of high quality mixing solutions for many different materials and containers. Our Agitator Speed Controller ensures that your mixing process can be controlled to eliminate paint shear, foaming, and unnecessary compressed air consumption. Our mixing equipment will make sure you are set up for success starting with step one.
Drum and Mix Tank
- Agitators mount directly to mix tank or drum covers
- Dual propeller ensures efficient and thorough mixing
- Easy adjustment knob for fine tuning agitator speed to ideal mixing parameters
Clamp Mounted Agitators
- Clamp mounts agitator directly to drum
- Adjustable shaft angle to reduce mixing vortex and air entrapment
- Dual propeller ensures efficient and thorough mixing
- Easy adjustment knob for fine tuning agitator speed to ideal mixing parameters
Expanding Blade Agitators
- Corrosion resistant materials
- Threads into 1.5” or 2” drum bung
- Includes angled adapter reduces vortexing and allows for off center mounting
- Customize configuration by adjusting blade height or by adding additional blade assemblies
- Collapsible blades fit through drum bung and expand when spinning for efficient mixing
Twistork® Agitators
- Helix blade effectively mixes higher viscosity materials
- Mounts directly to 2 inch drum bung
- Stainless and carbon steel material options
- Siphon model allows material transfer though agitator shaft
- Sealed agitator drive prevents material contamination and evaporation
- ATEX approval for hazardous locations
Heavy Duty In-Drum Back-Geared Agitator
- Corrosion resistant materials for high quality and long life
- Leak-free gearbox eliminates material contamination common with oil filled units
- Installs easily onto in-drum agitators
- Mounts directly to drum bung, choose 1.5 in or 2 in
- Includes 3/8 in, 7/16 in, ½ in, 5/8 in shaft adapters, compatible with several styles
- ATEX approval for hazardous locations
Heavy Duty Drum Agitator
- Heavy duty gearbox mixes high viscosity materials
- Leak-free and oil-less gearbox prevents material contamination
- Stainless steel agitator and cover for corrosion resistance and waterborne compatibility
- Twin paddles thoroughly mix finishing materials
- Siphon option allows material transfer through agitator shaft
- Access port for easy sampling and inspection of material during operation
Agitator Speed Controller
- Provides closed-loop speed control for agitators
- Maintains constant set speed even as viscosity or drum levels change
- Installs within minutes
- Prevents over-agitation of shear sensitive materials and foaming of waterborne materials
- Extends agitator lifetime by eliminating agitator over speeding
- Lowers energy costs by reducing air consumption
Replacement Air Motors
- Replacement air motors will give new life your existing agitators
- Use the chart below to determine compatibility
- Easy to select and install
Pail Cover Agitator
- Lift handles for easy moving and color changes
- Locking bolts to secure cover and reduce spills
- Ideal for wall mount pumps or spray packages
Heavy Duty Pressure Tank Agitators
- 20:1 gear reduction to mix high viscosity materials, even at low speeds
- Sealed agitator shaft to prevent air leakage and contamination
- Built-in baffle and support for efficient mixing
- Compatible with Graco pressure tanks
Electric Agitators
- Low shear mixing ensures uniform particle dispersion without material degradation
- Compatible with waterborne and solventborne materials
- Sealed gearbox eliminates maintenance
- Lubrication-free shaft seal prevents solvent attack of agitator bearings and gearbox
- Efficient motor provides superior mixing performance with less energy consumption
- Designed specifically to meet the demanding needs of the industrial finishing market
- Inverted duty motor for variable speed adjustment via variable frequency drive (VFD)
Hoses, Fittings, Swivels and Gauges
Hoses, Fittings, Swivels and Gauges
The key to a productivity is a complete system with hoses, fittings, swivels and gauges. Our gauges, fittings and hoses have options for both air and fluids, and our material selections cater to the needs of the finishing industry. They handle tough solvents, moisture sensitive or corrosive acid catalysts. They withstand the harshest environments and minimize downtime.
Bulk Hose and Fittings
Nylon Fluid Hose
- Nylon tube
- Compatible with catalyst and waterborne materials
- Order 500 ft (152 m) increments
2-piece Reusable Hose Fittings
- Compatible with catalyst and waterborne materials
- Easily create custom fluid hoses
Bulk Hose and Fittings
Braided Fluid Hose
- Nylon braided hose
- Neoprene cover
- Compatible with catalyst and waterborne materials
- Order 500 ft (152 m) increments
3-piece Reusable Hose Fittings
- Easily create custom fluid hoses
- Three piece threaded design
- Fittings can be reused
Bulk Hose and Fittings
Flexible Air Hose
- PVC braided hose
- PVC cover
- Flexible hose allows easy movement and improved ergonomics
- Bulk ordering allows custom fabrication of specialized hoses
- Order 500 ft (152 m) increments
2-piece Reusable Hose Fittings
- Simple two piece threaded design
- Easily create custom fluid hoses
Coupled Stainless Steel Hoses
- Compatible with moisture sensitive materials
- Many different sizes, lengths, pressures, and connections available
- Fully assembled, includes couplings
- PTFE hose with braided SST cover
Moisture-Lok
Hoses
- Compatible with moisture sensitive materials
- Designed specifically to prevent moisture permeation through hose lining
- Many different sizes, lengths, pressures, and connections available
- Fully assembled, includes couplings
- Ideal for use with plural component materials
High Pressure Swivels
Swivels and Valves
- Improve mobility and ergonomics with high pressure swivels
- Swivels provide added rotational flexibility while providing high quality sealing even at high pressures
- Inline and Z configurations available
Check Valves
Swivels and Valves
- Stainless steel and PTFE materials are compatible with catalyst, waterborne, and other finishing materials
- Prevent fluid leakage and backflow
- Compact and easy to install
- Improves pump performance
- Easily install a wide variety of flat tips for many spraying options
Pressure Relief Valve
Swivels and Valves
- Automatically relieves system pressure at specified rating to protect your system from overpressure
- Stainless steel and PTFE materials are compatible with catalyst, waterborne, and other finishing materials
- Compact and easy to install
- Tungsten and carbide materials ensure low wear and long life
Ball Valves
Swivels and Valves
- Stainless steel and PTFE materials are compatible with catalyst, waterborne, and other finishing materials
- Many different connection options to meet your specific needs
- 500 psi (35 bar) pressure ratio
